Construction Board + Tools Kit
For every little builder out there!
This construction board has unlimited potential and learning opportunities.
Hammer the wooden nails in, thread the nuts and washers onto the wooden dowel, use the wooden screwdriver to twist and screw the extra-large bolts into the board.
Fine motor skills, hand-eye coordination, practical skills... and so much more!
This construction board and toolset includes:
- A handmade solid wood construction board
- 6 x bolts for screwing
- 6 x wooden dowel for hammering
- 6 x large metal nuts
- 6 x large metal washers
- 1 x Log Hammer
- 1 x Log Screw Driver
This entire set is made by hand from sustainably sourced and FSC certified wood and sustainably salvaged branches destined for the green waste.
All products are intended and designed for children above the age of 36 months Some products may pose a choking hazard and it is not recommended that children who still put objects in their mouth have access to our toys unless fully supervised.
Parental supervision is required at all times. Please check your items before use and discard if they show any signs of damage.
Keep it natural
You want to use a gentle cleanser on wooden toys. Anything from a simple vinegar and water solution (1 part vinegar to 10 parts water), a mild, environmentally friendly dish soap, and some warm water, or your favorite non-toxic multi-purpose cleaner, diluted with water, will work well. You don’t want to use bleach or harsh chemicals as it can dry-out the wood.
Be careful when cleaning any dyed toys as some excess dye may come off onto the cloth. It will not affect the toy but toys that are dyed are not designed to be submerged in water.
You never want to soak wooden toys, as wood is very porous. The shape of the toy can change and warp with too much moisture and if the toy doesn’t dry completely, more germs and bacterial will want to hang out. If the wood swells, it can cause the wood to crack or damage any dye or finish on the surface of the toy. Using a wet washcloth to clean will keep the wood from getting too drenched.
Easy as 1, 2, 3
Cleaning wood toys can happen in three easy steps. Spray the toys with a gently cleaner of choice, gently wipe down with a sponge or washcloth and a bit of warm water, then allow the toys to air dry. Putting them in the sun will help kill even more germs and speed up the drying process.
Vinegar does the trick again! Create a more concentrated mixture of vinegar and water. You can use a 1:1 ratio for stains. Spray the stain and scrub it with a sponge. Putting it in the sun to dry will also help “bleach” out the stain. If it’s a really tough stain, you can use a little sand-paper to buff it out. This is not recommended for dyed timber products. You will need to re-coat your wooden products with a natural oil protective rub after cleaning with vinegar.
Replenish the moisture
Every once and a while you will want to moisturise wooden toys, just as you would your cutting boards, butcher blocks, or wooden utensils. We use a beeswax balm made from natural beeswax and coconut oil and its a great non-toxic option. You only need a washcloth or rag for easy application.